RUT360
Overview
RUT360 is an updated version of our all-time best-seller RUT240. This compact industrial cellular router offers a possibility to connect to the internet using cellular, Wi-Fi, and wired networks. RUT360 is equipped with two Ethernet interfaces, 802.11 b/g/n WiFi, and 4G LTE Cat 6 cellular module, offering data speeds up to 300 Mbps. Unique programming, remote monitoring, and security features make RUT360 perfect for IoT and M2M applications, where secure and reliable connectivity is a must. Carrier aggregation functionality makes this compact device irreplaceable in areas or applications where cellular data speeds are limited.
Features
Mobile |
|
Mobile module |
4G (LTE) – Cat 6 up to 300 Mbps, 3G – up to 42 Mbps |
Status |
Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID |
SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply |
USSD |
Supports sending and reading Unstructured Supplementary Service Data messages |
Black/Whiles list (planned) |
Operator black/white list |
Band management |
Band lock, Used band status display |
APN |
Auto APN |
Bridge mode |
Direct connection (bridge) between mobile ISP and device on LAN |
Multiple PDN |
Possibility to use different PDNs for multiple network access and services |
Wireless
|
|
Wireless mode |
802.11 b/g/n, 2x2 MIMO, Access Point (AP), Station (STA) |
WiFi security |
WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation |
ESSID | ESSID stealth mode |
Wireless Hotspot | Captive portal (Hotspot), internal/external Radius server, built in customizable landing page |
Ethernet
|
|
WAN |
1 x WAN port (can be configured as LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover |
|
|
LAN |
1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover |
Network
|
|
Routing |
Static routes, Dynamic routes (planned) |
Network protocols |
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP (planned), SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP (planned), MQTT (planned), Wake on LAN (WOL) (planned) |
VoIP passthrough support |
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
Connection monitoring |
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection |
Firewall |
Port forward, traffic rules, custom rules |
DHCP |
Static and dynamic IP allocation, DHCP Relay, Relayd |
QoS / Smart Queue Management (SQM) |
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
DDNS |
Supported >25 service providers, others can be configured manually |
Network backup |
VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover |
Load balancing |
Balance your internet traffic over multiple WAN connections |
SSHFS (optional) |
Possibility to mount remote file system via SSH protocol |
Security
|
|
Authentication |
Pre-shared key, digital certificates, X.509 certificates |
Firewall |
Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
Attack prevention |
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
VLAN |
Tag based VLAN separation |
Mobile quota control |
Custom data limits for both SIM cards |
WEB filter |
Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only |
Access control |
Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
VPN
|
|
OpenVPN |
Multiple clients and server can be running simultaneously, 12 encryption methods |
OpenVPN Encryption |
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
IPsec |
IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
GRE |
GRE tunnel |
PPTP, L2TP |
Client/Server instances can run simultaneously, L2TPv3 support (planned) |
Stunnel (planned) |
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code |
DMVPN |
Method of building scalable IPsec VPNs |
SSTP (planned) |
SSTP client instance support |
ZeroTier |
ZeroTier VPN client support |
WireGuard |
WireGuard VPN client and server support |
Modbus
|
|
Modbus TCP Slave
|
|
ID range |
Respond to one ID in range [1;255] or any |
Allow Remote Access |
Allow access through WAN |
Custom registers |
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality |
Modbus TCP Master
|
|
Supported functions |
01, 02, 03, 04, 05, 06, 15, 16 |
Supported data formats |
8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
Data to Server (planned)
|
|
Protocols |
HTTP(S), MQTT, Azure MQTT, Kinesis |
MQTT Gateway (planned)
|
|
MQTT gateway |
Allows sending commands and receiving data from MODBUS Master through MQTT broker |
Monitoring & Management
|
|
WEB UI |
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log |
FOTA |
Firmware update from server, automatic notification |
SSH |
SSH (v1, v2) |
SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET |
Call |
Reboot, Status, Mobile data on/off, Output on/off |
MQTT (planned) |
MQTT Broker, MQTT publisher |
SNMP (planned) |
SNMP (v1, v2, v3), SNMP trap |
JSON-RPC |
Management API over HTTP/HTTPS |
Modbus (planned) |
MODBUS TCP status/control |
RMS |
Teltonika Remote Management System (RMS) |
IoT Platforms
|
|
Clouds of things |
Allows monitoring of: Device data, Mobile data, Network info, Availability |
ThingWorx |
Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type |
Cumulocity |
Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP |
Azure IoT Hub | Can send device IP, Number of bytes send/received, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server |
System Characteristics
|
|
CPU |
QCA9531, MIPS 24kc, 650 MHz |
RAM |
128 MB, DDR2 |
FLASH storage |
16 MB, SPI Flash (optional up to 256 MB) |
Firmware / Configuration
|
|
WEB UI |
Update FW from file, check FW on server, configuration profiles, configuration backup |
FOTA |
Update FW/configuration from server |
RMS |
Update FW/configuration for multiple devices at once |
Keep settings |
Update FW without losing current configuration |
Input/Output |
|
Configurable I/O |
2 x Configurable digital Inputs/Outputs. Digital input 0 - 6 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mA |
Events |
SMS, EMAIL, RMS |
I/O juggler |
Allows to set certain I/O conditions to initiate event |
Power
|
|
Connector |
4 pin industrial DC power socket |
Input voltage range |
9 – 30 VDC, reverse polarity protection, voltage surge/transient protection |
Power consumption |
10.5 W max |
Physical Interfaces (Ports, Led's, Anntenas, Buttons, Sim)
|
|
Ethernet |
2 x RJ45 ports, 10/100 Mbps |
I/Os |
2 x Configurable digital Inputs/Outputs on 4 pin power connector |
Status LEDs |
2 x Mobile connection type, 3 x Mobile connection strength, 2 x Eth status, 1 x Power |
SIM |
1 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders |
Power |
1 x 4 pin DC connector |
Antennas |
2 x SMA for LTE, 2 x RP-SMA for WiFi |
Reset |
Reboot/User default reset/Factory reset button |
Other |
1 x Grounding screw, 1 x lock |
Physical Specifications
|
|
Casing material |
Aluminum housing with DIN rail mounting option |
Dimensions (W x H x D) |
100 x 30 x 85 mm |
Weight |
247 g |
mounting options |
DIN rail, flat surface placement |
Operating Environment
|
|
Operating temperature |
-40 °C to 75 °C |
Operating humidity |
10% to 90% non-condensing |
Resources