TRB145
Overview
TRB145 is a mission-critical LTE Cat 1 gateway, equipped with RS485 interface. Compact design and easy installation make this gateway perfect for applications, where a sole gadget must be remotely controlled over the RS485 serial interface. Just like the rest of TRB products, TRB145 is engineered to be used in industrial applications. Therefore, it has a wide range of software features, such as SMS control, Firewall, Open VPN, IPsec, Teltonika Networks Remote Management System (RMS), and FOTA support.
Features
Mobile
|
|
Mobile module |
4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps |
Status |
Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID. |
SMS/Call |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, Call utilities |
USSD |
Supports sending and reading Unstructured Supplementary Service Data messages |
Black/White list |
Operator black/white list |
Band management |
Band lock, Used band status display |
APN |
Auto APN |
Bridge |
Direct connection (bridge) between mobile ISP and device on LAN |
Passthrough | Gateway assigns its mobile WAN IP address to another device on LAN |
Multiple PDN |
Possibility to use different PDNs for multiple network access and services |
Network |
|
Routing | Static routing |
Network protocols |
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, SSH, DHCP, SNMP, MQTT |
Connection monitoring |
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection |
Firewall |
Port forwards, traffic rules, custom rules |
DHCP |
Static and dynamic IP allocation |
QoS / Smart Queue Management (SQM) (planned) |
Traffic priority queuing by source/destination, service, protocol or port |
DDNS |
Supported >25 service providers, others can be configured manually |
SSHFS |
Possibility to mount remote file system via SSH protocol |
Security
|
|
Authentication |
Pre-shared key, digital certificates, X.509 certificates |
Firewall |
Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T |
Attack prevention |
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
Mobile quota control |
Set up custom data limits for SIM card |
WEB filter |
Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only |
Access control |
Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
VPN
|
|
OpenVPN |
Multiple clients and a server can run simultaneously, 12 encryption methods |
OpenVPN Encryption |
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
IPsec |
IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
GRE |
GRE tunnel |
PPTP, L2TP |
Client/Server services can run simultaneously, L2TPv3 support |
ZeroTier |
ZeroTier VPN |
WireGuard
|
WireGuard VPN client and server support |
Serial Communication Modes
|
|
Modes |
Console, OverIP, Modem (Full or Partial control), MODBUS RTU master, MODBUS gateway, NTRIP client (planned) |
Modbus
|
|
Modbus TCP Slave
|
|
ID filtering |
Respond to one ID in range [1;255] or any |
Allow remote access |
Allow access through WAN |
Custom registers |
MODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality |
Modbus TCP Master
|
|
Supported functions |
01, 02, 03, 04, 05, 06, 15, 16 |
Supported data formats |
8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
Modbus RTU Master
|
|
Suported baud rates |
From 300 to 115200 |
Supported functions |
01, 02, 03, 04, 05, 06, 15, 16 |
Supported data formats |
8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
Number of data bits |
From 5 to 8 |
Number of stop bits |
1 or 2 |
Parity |
None, Even, Odd |
Flow control |
None, RTS/CTS, Xon/Xoff |
MQTT Gateway
|
|
Gateway |
Allows sending commands and receiving data from MODBUS Master trough MQTT broker |
Data to Server
|
|
Protocols |
HTTP(S), MQTT, Azure MQTT, Kinesis |
Monitoring & Management
|
|
WEB UI |
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, system log, kernel log |
FOTA |
Firmware update from sever, automatic notification |
SSH |
SSH (v1, v2) |
SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET |
Call |
Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer |
TR-069 |
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem |
MQTT |
MQTT Broker, MQTT publisher |
JSON-RPC |
Management API over HTTP/HTTPS |
MODBUS |
MODBUS TCP status/control |
RMS |
Teltonika Remote Management System (RMS) |
IoT Platforms
|
|
Cloud of Things |
Allows monitoring of: Device data, Mobile data, Network info, Availability |
ThingWorx |
Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type |
Cumulocity |
Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP |
Azure IoT Hub |
Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server |
System Charecteristics
|
|
CPU |
ARM Cortex-A7 1.2 GHz CPU |
RAM |
128 MB (50 MB available for userspace) |
FLASH storage |
512 MB (200 MB available for userspace) |
Firmware / Configuration
|
|
WEB UI |
Update FW from file, check FW on server, configuration profiles, configuration backup |
FOTA |
Update FW/configuration from server |
RMS |
Update FW/configuration for multiple devices |
Keep settings |
Update FW without losing current configuration |
Firmware Customization
|
|
Operating system |
RutOS (OpenWrt based Linux OS) |
Supported languages |
Busybox shell, Lua, C, C++ |
Development tools |
SDK package with build environment provided |
Input/Output
|
|
Configurable I/O |
2 x Configurable Inputs/Outputs. Digital input 0 - 6 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mA (not available in TRB145*2****) |
Output control |
HTTP POST/GET, Schedule |
Events |
SMS, EMAIL |
I/O juggler |
Allows to set certain I/O conditions to initiate event |
Power
|
|
Connector |
4 pin industrial DC power socket |
Input voltage range |
9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10us max |
Power consumption |
< 5 W |
Physical Interfaces (Ports, Led's, Anntenas, Buttons, Sim)
|
|
RS485 |
1 x 6 pin terminal block for 2-wire or 4 wire interface |
I/Os |
2 x Configurable I/O pins on 4 pin power connector (I/O not available in TRB145*2****) |
USB |
1 x Virtual network interface via micro USB |
Status LEDs |
3 x connection type status LEDs, 5 x connection strength LEDs, 1x Power LED |
SIM |
1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V |
Power |
4 pin power connector with 2 x configurable Digital Inputs/Outputs (I/O not available in TRB145*2****) |
Anntena |
1 x SMA for LTE |
Reset |
Reboot/User default reset/Factory reset button |
Physical Specifications
|
|
Casing material |
Aluminum housing |
Dimensions (W x H x D) |
74.5 x 25 x 64.4 mm |
Weight |
130 g |
Mounting options |
Bottom and sideways DIN rail, Flat surface |
Operating Environment
|
|
Operating temperature |
-40 °C to 75 °C |
Operating humidity |
10 % to 90 % non-condensing |
Ingress Protection Rating |
IP30 |
Regulatory & Type Approvals
|
|
Regulatory |
CE/RED, EAC, RoHS, WEEE |
EMI
|
|
Standards |
Draft ETSI EN 301 489-1 V2.2.0, Draft EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0 |
ESD |
EN 61000-4-2:2009 |
RS |
EN 61000-4-3:2006 + A1:2008 + A2:2010 |
EFT |
EN 61000-4-4:2012 |
Surge protection |
EN 61000-4-5:2014 |
CS |
EN 61000-4-6:2014 |
DIP |
EN 61000-4-11:2004 |
RF
|
|
Standards |
EN 300 511 V12.5.1, ETSI EN 301 908-1 V11.1.1, ETSI EN 301 908-2 V11.1.2, ETSI EN 301 908-13 V11.1.2 |
Safety
|
|
Standards |
IEC 62368-1:2014(Second Edition), EN 62368-1:2014+A11:2017 EN 50385:2017 EN 62232:2017 |
Resources